The engine system mainly consists of fuel supply and speed control system, intake and exhaust system, lubrication system, cooling system, starting and charging system, etc.

（1）燃油供給與調速系統 燃油供給系統主要由輸油泵、燃油濾清器、燃油冷卻器、噴油泵和噴油器等部件組成。它的功用是：根據柴油機工況要求，定時、定量、定壓地將柴油噴入燃燒室內。同時，通過噴油泵及調速器的作用，以控制柴油機在給定的工況下穩定運轉。 常用的燃油供給與調速系統主要有柱塞式噴油泵燃油供給與調速系統，PT燃油供給與調速系統，電控噴射（包括高壓共軌）燃油供給與調速系統等。

(1) The fuel supply and speed control system is mainly composed of components such as the fuel pump, fuel filter, fuel cooler, fuel injection pump, and fuel injector. Its function is to inject diesel into the combustion chamber at a fixed time, quantity, and pressure according to the operating conditions of the diesel engine. At the same time, the diesel engine is controlled to operate stably under given operating conditions through the action of the fuel injection pump and governor. The commonly used fuel supply and speed regulation systems mainly include plunger type fuel injection pump fuel supply and speed regulation system, PT fuel supply and speed regulation system, electronic control injection (including high-pressure common rail) fuel supply and speed regulation system, etc.

（2）進排氣系統 柴油機的進排氣系統主要由空氣濾清器、進排氣管、消聲器以及增壓系統組成。

(2) The intake and exhaust system of a diesel engine mainly consists of an air filter, intake and exhaust pipes, a muffler, and a turbocharging system.

（3）潤滑系統 潤滑系統的功用是向柴油機各摩擦表面提供充足的機油，以減少其磨損，保證其正常工作。同時還具有散熱、清潔、密封和防蝕等作用。潤滑系統主要由機油泵、機油濾清器、離心濾清器、各種調節閥類和潤滑管路機油冷卻器等部件組成。

(3) The function of the lubrication system is to provide sufficient oil to the friction surfaces of the diesel engine to reduce wear and ensure its normal operation. At the same time, it also has functions such as heat dissipation, cleaning, sealing, and corrosion prevention. The lubrication system mainly consists of components such as oil pump, oil filter, centrifugal filter, various regulating valves, and lubrication pipeline oil cooler.

（4）冷卻系統 冷卻系統主要作用是通過冷卻介質將發動機工作時因燃燒和摩擦產生的熱量帶出，保證發動機在非常合理的溫度范圍內工作。根據冷卻介質的不同可分為水冷式和風冷式。 水冷式分為自然循環冷卻和強制循環冷卻，強制循環冷卻中可分為開式和閉式。在開式強制循環冷卻系統中，冷卻介質直接與大氣相通。而在閉式強制循環冷卻系統中，冷卻介質不與外界大氣直接相通，冷卻介質在密閉的系統內循環，冷卻系統的壓力略高于大氣壓力，冷卻介質的沸點可以高于攝氏100度以上。其優點可以提高柴油機的進、出水口水溫，使冷卻水溫差小，能穩定柴油機工作溫度和提高其經濟性，還能提高散熱器的平均溫度，從而縮小散熱面積，減少水的消耗，并縮短機油的預熱時間。冷卻系統的主要組成部件為散熱器、冷卻風扇、冷卻水泵、冷卻強度調節器、冷卻防凍液等。

(4) The main function of the cooling system is to carry out the heat generated by combustion and friction during engine operation through the cooling medium, ensuring that the engine operates within the most reasonable temperature range. According to the different cooling media, it can be divided into water-cooled and air-cooled. Water cooled cooling can be divided into natural circulation cooling and forced circulation cooling, while forced circulation cooling can be divided into open and closed types. In an open forced circulation cooling system, the cooling medium is directly connected to the atmosphere. In a closed forced circulation cooling system, the cooling medium is not directly connected to the external atmosphere. The cooling medium circulates in a closed system, and the pressure of the cooling system is slightly higher than the atmospheric pressure. The boiling point of the cooling medium can be above 100 degrees Celsius. Its advantages can increase the water temperature at the inlet and outlet of the diesel engine, reduce the temperature difference between the cooling water, stabilize the working temperature of the diesel engine and improve its economy. It can also increase the average temperature of the radiator, thereby reducing the heat dissipation area, reducing water consumption, and shortening the preheating time of the engine oil. The main components of the cooling system are radiators, cooling fans, cooling water pumps, cooling intensity regulators, cooling antifreeze, etc.

（5）啟動充電系統 柴油發動機借助外力由靜止狀態轉入工作狀態的全過程稱為柴油機的啟動過程。完成啟動過程所需的裝置稱為啟動系統。它的作用是提供啟動能量，驅動曲軸旋轉并達到啟動轉速（一般為150-300r/min)，可靠地實現柴油機啟動。

(5) The entire process of starting a diesel engine from a stationary state to a working state with the help of external forces is called the starting process of a diesel engine. The device required to complete the startup process is called the startup system. Its function is to provide starting energy, drive the crankshaft to rotate and reach the starting speed (usually 150-300r/min), and reliably achieve diesel engine starting.

本文由燃氣發電機組友情奉獻.更多有關的知識請點擊: http://www.huannengpower.com真誠的態度.為您提供為多維度的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待

This article is dedicated to the friendship of gas generator units. For more relevant knowledge, please click on: http://www.huannengpower.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned